How To Fit A Sectional Garage Door

garage door installation in Whitefish Bay

This guide provides info on the best ways to fit a USA Requirements Sectional Garage Door and offer you some beneficial info to think about prior to buying. If you have any problems and would like some free advice on sectional garage doors or any other types of garage doors then you are welcome to contact us at garage door installation in Whitefish Bay.

Things to think about:

  1. Will the door be fitted in between the opening or behind the opening?
  2. Do you wish to automate the door?
  3. Do you desire the door to have padding?

These are the primary issues. Then you have the color of the door and framework, window alternatives and so on, the listing of choices is typically rather lengthy so it’s a smart idea to completely check out the pamphlet prior to choosing.

In between or Behind
Generally, sectional garage doors are developed to be fitted behind the opening as this enables complete drive through height and width to be acquired. Nevertheless it is not constantly practical to suit your brand-new sectional door completely behind the opening. This might be that you do not have adequate headroom or space behind the piers or sometimes you might not have piers on both sides of the opening.

Do you have adequate space behind the lintel and back into the garage to guarantee the tracks and tailoring can be fitted properly? A guideline to assist you choose this might be to think about you are aiming to press a box the overall height and width of the garage door completely into the garage. If there is something in the method like lights or the ceiling slopes down then you might have to reevaluate the kind of door you wish to fit, or make the needed changes prior to the door is fitted for instance moving lights out the way or raising/ moving roofing system joists when possible and so on.

Side space

Typically gas and electrical meters could be fitted on the wall of the garage and you might have to inspect they are not most likely to remain in the method likewise. If they remain in the method you might get your gas or electrical provider to move them. Supplying they do not need to move them too far this is generally totally free or they might charge a cost. Call them to see exactly what their protocol has this.


Measure you opening from brick to brick near the bottom, middle and top of the opening and compose these dimensions down. Now determine the flooring to lintel dimensions at the left, middle and right of the opening and note them down. Do they fit? If not put a 4 to 6 foot level on the sides and lintel and flooring to see exactly where the opening runs out square. If the flooring is out by more than 2cm then you might have space when the door is shut. Think about having the flooring leveled prior to fitting the door If the piers are not level you might have to buy a somewhat smaller sized door if it’s being fitted in between the opening to guarantee you can get the door fitted directly. Then call your Sectional Garage Door Provider to have then purchased your door for you.

Get rid of your old door

BE EXTREMELY CAUTIOUS when getting rid of garage door springs or cutting cable televisions on canopy doors – if suspicious look for expert assistance!

If you have an existing canopy garage door to get rid of then you either have to un-tension the over-head spring or cut the cable televisions. If your door remains in a pretty good condition you might wish to offer it on eBay or in the regional totally free advertisements paper then you can purchase brand-new cones and cable television prior to offering the door or thoroughly un-tension the spring to guarantee the cable televisions are still functional prior to offering the door.

As soon as the spring is done you have to eliminate the repairings holding the old door in place then raise the door out of the way and eliminate the frame if it is not being utilized. Now you can set up the brand-new garage door.

Fitting the brand-new sectional door.
It is very important to check out and comprehend the fitting guidelines prior to starting to install your brand-new door, get any concerns responded to prior to beginning as this will conserve you time in the long term.

As soon as you recognize the fitting requirements or your specific sectional garage door you can start.

1. Put together the frame of the door and secure it into position guaranteeing it is square and level in the opening utilizing packers as required.

2. Utilizing an appropriate masonry drill such as an SDS drill or comparable, drill the needed repairing holes and place the provided plugs. When done you can repair with the provided mendings/ washers utilizing a cordless drill with a socked accessory or a socket set.

3. When the dealings with of the frame are total, reconsider to guarantee the frame is still level and square then proceed to fit the tracks. Follow the guidelines for fitting the tracks which will include linking them to the tracks on the frame making sure the signs up with are smooth then hanging the tracks from the ceiling joists or side walls. Guarantee the tracks are square by determining the diagonals of the tracks prior to protecting.

4. Fit the springs, depending upon the equipment setup of the sectional door you have actually purchased you might be fitting a spring on the back of the tracks, springs down the sides of the frame or overhead springs on the frame. Follow the maker’s guidelines for this and be extremely cautious when managing garage door springs.

garage door installation in Whitefish Bay

5. When the springs/ cable televisions remain in location then you will have to place the rubber strip into the channel on the bottom door panel. An excellent idea here is to spray the channels with WD40 or much like make sure the rubber slides in properly. When this remains in you are ready to position the panel into position.

6. Location the panel into position and secure it to the frame to prevent it falling whilst you connect the brackets and wheels. When you have actually fitted all the brackets and wheels you will have the ability to connect the spring cable televisions if the door has this kind of equipment.

7. Continue to fit the remainder of the panels guaranteeing the BRACKETS AND WHEELS are on properly otherwise the door will not open effectively!

8. As soon as you have all the panels in place you will have to stress the springs, Care must be taken and you ought to USE STRONG GLOVES in case you have an issue with the tensioning. Sectional garage door springs are exceptionally effective when tensioned and they can trigger some SEVERE DAMAGE to your hands if you are not cautious.

9. Oil your tracks and moving parts and fit the locking manage if the door is a by hand run door.

10. If the door is to be run by a garage door opener then fit this according to the directions guaranteeing the boom is level and centrally installed to the door.

Enjoy your brand-new sectional garage door!

How to Install a Sectional Garage Door